Stranded conductors
#32awg $.10
#30awg $.12
#28awg $.15
#26awg $.18 also
available in solid core twisted pair ($.40)
#24awg $.20 also
available in solid core ($.20)
#22awg $.25 also
available in solid core ($.25)
#20awg $.30
#18awg $.45
#16awg $.55
#14awg $.75
#12awg $1.50
#10awg $2.50
# 8awg $3.50
stranded center, teflon insulation, silverplated
copper shield, then thick teflon tape
24awg $.75
22awg $.85
20awg $1.00
twisted pair stranded center, teflon insulation,
silverplated copper shield together, then thick teflon tape (makes good
interconnect, especially 18awg, if you prefer more bottom in your tonal
balance try the 16awg, need the top tilted up go w/ smaller gauges. this
has been my listening experience YMMV)
26awg $1.10
24awg $1.25
22awg $1.35
20awg $1.55
18awg $1.75
16awg $2.35
three conductor, same as above (26 and 24awg would
be good to use for balanced interconnect, 16 and 14awg makes good power
cords or try three runs of some 12 or 10awg above though it is more difficult
to fit them in IEC plug ends). Female IEC plug ends: 10amp $3 each, 15amp
$3.50 each.
26awg $1.35
24awg $1.55
16awg $3.25
14awg $4.50 (no shield or tape)
tin plated copper braid shielding
3/4" (approximately 7awg) flat $2.50
1/4" (approximately 10awg) tubular $1.10
7/32(approximately 12awg) tubular $1.00
11/64(approximately 14awg) tubular $.90
Teflon tubing
26awg $.20
24awg $.25
22awg $.30
20awg $.35
18awg $.40
16awg $.50
13awg $.75 (thick wall)
heat shrink tubing
3/64" $.14
1/16" $.20
3/32" $.22
1/8" $.26
3/16" $.28
1/4" $.27
3/8" $.40
1/2" $.45
3/4" $.72
1" $.85
1.5" $1.50
2" $2.00
polymesh braiding
1/2" $.75
(black)
3/4" $1.25
(black or natural)
1 1/4" $2.50 (black)
Female IEC plug ends: 10amp $3 each, 15amp $3.50 each.
All sales subject to stock on hand. No backorders.
To place an order contact via email:
emoonie@pacbell.net
Teflon® is a registered trademark of DuPont