GRIND RAIL PLAINS

Below are some idea's that i have for making grind rails.These grind rails can be used for bmx biking soap shoe grinding and and in line skating.


1st idea THIS GRIND RAIL IS FOR SKATEBOARDING BMX BIKING AND SOAP SHOE GRINDING AND INLINE SKATING

1 grind rail way is you to have 3 piceses of wood that are around 15-14 inches high and 3 piceses of wood that are 12 inches and 1 pice of wood that is around 4 feet to 3 feet so first you will need a power screw driver and 6 screws and two people helping you.So first you start by taking the 3 pices of the wood that and 14 inches and put them out flat facing up and take the 12 inch wood piceses and put them put flat on top of the 14 inches wood and screw them down then take the 3 inch wood and put on the 14 inch wood and make sure the 14 inch wood is spreded across equaly then screw the 3 foot wood on top then you got your self a grind rail and put a little wax on it to make it smotther.


2nd idiaTHIS GRIND RAIL IS ONLY FOR SOAP SHOES

This grind rail can be only used for grinding with soap shoes first you get a piece of pvc pipe and make sure it's porbably around 5 feet big and big enough so you can fit your soap plate on it.then you will need a piece of wood that is around five feet big first you need to take the piece if wood that is five feet and put pvc pipe glue ont the wood so the pipe would stay on it or you can take a scew driver and drill the screw into the pipe so it would stay in the wood and don't put wax on the pipe because the wax dries on it then it becoames rough this should take you about a half and hour to build.

more grind rail idea's comming soon!!!!!


©ALL RIGHTS TO ZUBIN COPYRIGHT 2001